12x18W 6in1 Freedoom Battery Powered Wireless LED Par Light With Remote Control

12*18W 6in1 RGBAW+UV BATTERY POWERED LED PAR LIGHT

User Manual

SAFETY INSTRUCTION

Caution

Do not attempt any repairs yourself. Doing so will void your manufactures warranty. In the unlike event your unit may require service please contact us.

Warning

To prevent or reduce the risk of the electrical shock or fire, do not expose this unit to any moisture. Please read this manual carefully to familiarize yourself with basic operations of this unit

Safety precautions

1.Do not expose this unit to , wet moisture, explosive

2.Before plugging the power be sure local power outlets matches with the required voltage of the unit

3.Do not remove the cover under the circumstance in case you are not qualified to do so

4.Never connect the power when cover is removed

5.Never use this unit if it becomes damage

6.Never connect this unit to any if dimmer and / or power pack

7.If the unit will not be used for the long time , disconnect it from the power supply

8.Always mount this unit safe and stable and make sure the area will have proper ventilation. Take care this unit will not  mounted in are close to heat sources such as lighting fixtures, amplifiers heat registers, stoves and radiators

9.Always contact us in case you have any doubts

General Instruction

This is a battery powered and wireless Dmx intelligent RGBAW UV color light. User can control the light by using wireless Dmx transmitter or run at master and salve mode. Fixture it has 32 static color, user can set lights at static color mode without using the Dmx controller

FEATURE & INSTRUCTION

MAIN MENU

1. Operate light with touch or encoder button

• Top Left Sets your Fixtures Address

• Top Center Displays your Fixures Modes of operation

• Top Right Displays Test Mode

• Bottom Left Displays options for Display, (i.e. Screen Rotation)

• Bottom Center displays Advanced option for Fixture.

• Bottom Left diplays current mode, DMX address, Fixture Information.

2. Parameter value setting

Press MENU to navagate menu

• press or to scroll to correct setting. Touch to enter sub

menu.

• Set and save value. Touch submenu.

3. Sub-Menu

• Select desired sub menu from main menu to enter corresponding sub menu shown

below. There is a of total 15 menu programs, includes class of parameter and

status:

• Addr - Select DMX address

• Chnd - Select DMX Channels 7/12

• Slnd - Select Enable Slave, Master,Sync or IR mode

• Shnd

• Select color presets

• Fade speed

• Flas speed

• Auto speed

• Soun - Select sensitivity

• Cust - Set values for up to 5 custom Color

• Dinn - Dimmer

• Blnd - Black out

• LED - Turn off LED display

• Disp - Invert Dispaly

• Test - Test Mode

• Fhrs - Fixture Hours

• Ver - Firmware Version

• Rest - Rest all values to Factory Settings

Mark:

1. One key operate function, choose POWER in the display show, choose “ON” and the light can be ON/FF when press the menufor a while.
2. Hide the current adjust function, press ENTER for 5 second in A001 menu into the current adjust function, UP DOWN to change the data, press ENTER to change each color.
3. This version can be worked in 2 kinds of protocol - DMX and RDM

DMX Channel

7 CH mode

This document was truncated here because it was created in the Evaluation Mode.